unisonic technologies co., ltd sb360 diode www.unisonic.com.tw 1 of 3 copyright ? 2015 unisonic technologies co., ltd qw-r601-081.c 3.0a schottky barrier rectifier ? description the utc sb360 is 3.0a schottky barrier rectifier. it uses utc?s advanced technology to provide customers with high current capability and low forward voltage drop, etc. the utc sb360 is suitable for free wheeling, low voltage and polarity protection applications, etc. ? features * low forward voltage drop * high surge capability * low power loss * high efficiency * high current capability ? ordering information ordering number pin assignment lead free halogen free package 1 2 packing sb360l-z21d-b sb360g-z21d-b do-201ad k a tape box sb360l-smc-r SB360G-SMC-R smc k a tape reel note: pin assignment: a: anode k: cathode ? marking do-201ad smc sb360 date code l: lead free g: halogen free cathode band for uni-directional only date code cathode band for uni-directional only utc sb360 l: lead free g: halogen free
sb360 diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-081.c ? absolute maximum ratings (t a =25c unless otherwise specified) single phase, half wave, 60hz, resistive or inductive load. for capacitance load, derate current by 20%. parameter symbol ratings unit dc blocking voltage v r 60 v working peak reverse voltage v rwm 60 v peak repetitive reverse voltage v rrm 60 v rms reverse voltage v r(rms) 42 v average rectified output current (note 2) t l =80c i o 3.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 80 a operating junction temperature t j -65~+150 c storage temperature t stg -65~+150 c notes: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. measured at ambient temperature at a distance of 9.5mm from the case. ? thermal data parameter symbol ratings unit smc 95 junction to ambient do-201ad ja 30 c/w note: thermal resistance from junction to lead vertical p.c.b. mounted, 0.500" (12.7mm) lead length with 2.5x2.5" (63.5x63.5mm) copper pad. ? electrical characteristics (t a =25c unless otherwise specified.) single phase, half wave, 60hz, resistive or inductive load. for capacitance load, derate current by 20%. parameter symbol test conditions min typ max unit reverse breakdown voltage v (br)r i r =0.50ma 60 v forward voltage drop v fm i f =3a, t j =25c 0.74 v v r =100v, t a =25c 500 a leakage current i rm v r =100v, t a =100c 10 ma note: short duration pulse test used to minimize self -heating effect.
sb360 diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-081.c utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
